This machine handle automatically the "KAMACHI" (cut the top and the bottom ends) process, the "OMOTEHARI" (stretch the tatami sheet over tatami mat) process and "KAMACHINUI" (sew the tatami sheet on to the tatami mat by the top and the bottom ends) process. You can exchange tatami sheet on the machine table. This machine sews thin tatami-mat of 13 mm very beautiful with bended needle. When you turn the handle lever, it is possible to adjust sewed position height and depth easily.

Item	Contents
Dimension(H)	1,810 mm
Dimension(D)	2,850 mm
Dimension(W)	2,350 mm
Working width	730 to 1,000 mm
Working length	760 to 2,000 mm
Worklng thin	13 to 60 mm
Working ability	Less than 7min30sec / cycle
Main electric supply	3ph 200V (Adaptable to your source)
Capacity	About 1.13Kw
Pneumatic air source	0.7 Mpa(7.0 Kgf/cm2)

This machine handle automatically the "HIRASASI"(sew the tatami sheet and edging cloth on to the tatami mat by both sides as well as trimming) process and the "KAESHINUI"(finish side hemming sew the edging cloth by both sides) process. When install our tatami sewing machines (MULTI ROBOT KT-21 and RYOUYOU ROBOT 3), you can produce 50 pieces tatami in a day. These machine is easy to operate and its production efficiency is very high. Even craftsmen with a little experience can easily produce Japanese tatami mats.

Item	Contents
Dimension(H)	1,920 mm
Dimension(D)	2,010 mm
Dimension(W)	3,700 mm
Working width	730 to 1,000 mm
Working length	760 to 2,000 mm
Worklng thin	13 to 60 mm
Main electric supply	3ph 200V (Adaptable to your source)
Capacity	About 2.0Kw
Pneumatic air source	0.7 Mpa(7.0 Kgf/cm2)

This machine sews tatami material board (Chemical board or straw board) automatically. This machine has 24 needles which length is 235mm, it is possible to sewing the thick board (from 5 to 60 mm), and finishing of tatami material board is very beautiful. This machine can sew the reverse side sheet such as polypropylene corting paper or nonwoven fabric at the same time. The working time is about 45 sec per a board (size 910 x 1,820 mm). Feeding interval and material thickness are controlled with easy operation.

Item	Contents
Dimension(H)	1,720 mm
Dimension(D)	4,450 mm
Dimension(W)	1,870 mm
Working thickness	5 to 60 mm
Working ability	45 sec / board
Needle	24 needles (Length is 235 mm) Midle18 needles (Pitch 47 mm) Both ends 3 needles (Pitch 30 mm)
Main electric supply	3ph 200V (Adaptable to your source)
Capacity	About 2.2Kw

The measuring instrument for tatami room enables you to measure the tatami room size accurately, and then figure out and determine each size of the Tatami to be installed. You put this instrument in the middle of the room and can turn the machine with a wireless remote controller. The instrument analyzes shape of the room by laser beam automatically. Skilled tatami craftsmen usually measure in rin units (0.3mm), our instrument is possible to measure very precision dimensions same as 0.3 mm. Anyone can measure accurate dimensions of the room and very convenient.

Item	Contents
Dimension(H)	210 mm
Dimension(D)	200 mm
Dimension(W)	270 mm
Net weight	About 6 Kg
Ability	350 to 4,500 mm
Memory capacity	200 rooms data Easy mode
Set up mode	Revision mode Reflection mode