B-NORI neo is pasted adhesive for wallcoverings. No-VOC and No-Formaline, Safe to Ship. Contains mold inhibitors, prevent the growth of mold under wallcoverings. The Absorbency to wallcoverings is good, so suitable for application by pasting machine.
Products code : 11-8554
Net weight : 18 kg
Ingredients : Wheat starch conductor
Appearacne : Pasted adhesive
Dissolving ratio : Water 12-13 Liter

B-NORI neo-G is pasted adhesive for wallcoverings. B-NORI neo-G contains ethylene vinyl-acetate copolymer water-emulsion. No-VOC and No-formaline, Safe to Ship. Contains mold inhibitors, prevent the growth of mold under wallcoverings. The Absorbency to wallcoverings is good, so suitable for application by pasting machine.

Technical specifications
Products code : 11-8555
Net weight : 18 kg
Ingredients : Wheat starch conductor
Appearacne : Pasted adhesive
Dissolving ratio : Water 12-13 Liter

HI-SEALER SET UP is primer for wallcoverings. Produces solid and evenly absorbent surfaces. HI-SEALER SET UP creates well-gripping surfaces for optimal adhesion of wallpaper.Water soluble primer.

Technical specifications
Products code : 12-8656
Net weight : 4 kg
Ingredients : Acrylic acid resin
Appearacne : Light-yellow semitransparent emulsion
A Use : Mortal, Concrete, Plaster, Veneer-bord etc

Hi-LEVEL is powdered putty for putting the undercoat on wall-board. You can dissolve it in the water very well. Hi-LEVEL adheres on finishing putty very well. It is not cracked even if you put it thick. The hardening time is from 60 to 240 minutes according to the kinds of putty.

Technical specifications
Products code : 12-8613
Net weight : 10 kgs / pack
Hardening time : 60 minutes
Mix ratio : pure water 5 Liter for 10 kgs.
A use : For undercoart / Plaster, Veneer, Mortal

Hi-SMOOTH is powdered putty for finishing coat. You can dissolve it in the water very well. Hi-SMOOTH adheres with wall coverings very well, and working-efficient. The hardening time is from 60 to 240 minutes according to the kinds of putty.

Technical specifications
Products code : 12-8623
Net weight : 10 kgs / pack
Hardening time : 60 minutes
Mix ratio : pure water 5 Liter for 10 kgs.
A use : For finishing / Plaster, Veneer, Mortal

INTERIOR CAULK is adhesive for caulking of wall-coverings. You can apply this caulking material on the joint in the wallcoverings to conceal and reinforce the chink. The finish of corners and joints is very beautiful.

Technical specifications
Products code : 22-7041
Net weight : 500 g
Ingredients : Acrylic acid ester resin
Color : white, amber, beige,
/ black, clear, gray, green, ivory