contents of this Site Catalogue is Here!
Japanese Site is Here!

Top page > Interior Decoration Machinery > Floor Decoration Machinery

FLOOR COVERINGS STRIPPER MACHINE / POWERFUL PECKER


The blade shakes to forward and backward according to the electric powered motor. the machine's working time is 10times earlier than the human's working time. Adjust the angle of blade with lever. You can choose the blade angle according to the floor-covering.Driving speed is adjusted with gripping the clutch lever. When gripping the clutch lever, the clutch is off and the machine can moved to backward. Wheels are built-in unidirectional clutch element, therefore working driving speed is more powerful.


Technical specifications
Products code : 21-6802
Dimention : W 915 x D 512 x H 684 mm
Net weight : 118 kgs
Power supply : Single phase AC100V, 550W
Working width : 150 - 305 mm
Normal blade : For PVC floor coverings
Sheet blade : For CF tiles
Strong blade : For firm floor coverings

Top of a page

FLOOR COVERINGS STRIPPER MACHINE / STRONG PECKER


The blade shakes to forward and backward according to the electric powered motor. the machine's working time is 10times earlier than the human's working time. Adjust the angle of blade with lever. You can choose the blade angle according to the floor-covering.Strong Pecker has three kind of blade. According to your choice of suitable blade, the working time becomes more early.


Technical specifications
Products code : 21-6502
Dimention : W 855 x D 480 x H 656 mm
Net weight : 74 kgs
Power supply : Single phase AC100V, 550W
Working width : 150 - 305 mm
Normal blade : For PVC floor coverings
Sheet blade : For CF tiles
Strong blade : For firm floor coverings

Top of a page

FLOOR COVERINGS STRIPPER MACHINE / COMPACT PECKER


Compnat machine for the stairs and kitchen floor.
Realized the peeling works of floor-coverings without damage to floor board.
Reduce the operation noize of machine by special bearing system.
Vibration to the hand of the worker was reduced by slight vibration driving.


Technical specifications
Products code : 21-6720
Dimention : W 356 x L 661 x H 802 mm
Net weight : 18.8 kgs (including a handle)
Power supply : Single phase AC100V, 300W

Top of a page

LINOLEUM ROLLER / LINOLEUM PUSHER (STD)


A must for linoleum floorings installation. Linoleum Roller helps distribute and flatten adhesive for floor coverings. After affix floor coverings on the floor, press with Linoleum Roller on the floor coverings for removing unnecessary air. Gross weight is 50 kgs, Roller width is 350 mm.

Technical specifications
Products code : 21-5685
Products code : 21-5686 (Rubber type)
Dimention : W 350 x D 160 x L 980 mm
Net weight : 50 kgs
Working width : 350 mm

Top of a page

KNEE KICKER / AIR KICKER


AIR KICKER is used when installing or repairing cerpets. The most valuable feature is the air-cylinder system. AIR KICKER reduce shock of knee for contracting air according to built-in cylinder. Compared with normal nkee kicker, the shock force is about 50 percentage. Pins can be dialed to eight-levels to adjust for carpets. The shaft length is adjustable in five position from 47 to 57 cm. The cylinder stroke is 0 to 5 cm.


Technical specifications
Products code : 21-1060
Length : From 47 to 57 cm
Net weight : 2.4 kgs

Top of a page

KNEE KICKER


KNEE KICKER is used to stretch the carpet. When KNEE KICKER is placed on the carpet, its pins penatrate in the backings of the carpet. Then force is applied in the back of KNEE KICKER by hitting the knee to move the carpet in place. Pins can be dialed to eight-levels to adjust for carpets. The shaft length is adjustable in five position from 43 to 53 cm.
Top of a page