Electric powered Pasting machine for less than 70cm-width wallpaper. This machine suitable for European wall coverings. Maximum pasting speed is 15 m/min. With compact and lightweight, anybody hand off this machine easily. Folding floorstand is convenient for handling of a car. Measuring system repeats automatically the with only the push of a button until the program is changed. Therefore, a reduction in working hours realized. The quantity of wallpaper adhesive is adjustable in eleven position.

Technical specifications
Products code : 81-0700
Dimention : W 1040 x D 380 x H 500 mm
Net weight : 19 kgs
Power supply : Single phase AC220V
Pasting speed : 15m/min
Working width : 700 mm

Electric powered wallpaper pasting machine for less than 105cm-width wallpaper. This machine suitable for Japanese wallcovering. With useable cutting device f or wallcovering edge. Maximum pasting speed is 15 m/min. Makes the pasting work much accurate,efficient and easy than to do it by hand work. Folding floorstand is convenient for handling of a car, and has locking casters. Removable cutting device is convenient for handling. Cutting points are able to adjust for wallcovering design. The digital LED shows clear views of wallcovering length and count the number. The amount of wallpaper adhesive is adjustable by adjusting knobs.

Technical specifications
Products code : 81-1281
Dimention : W 1411 x D 722 x H 876 mm
Net weight : 50 kgs
Power supply : Single phase AC220V
Pasting speed : 15m/min
Working width : 1050 mm

Electric powered wallpaper pasting machine for less than 110cm-width wallpaper. Accept a wide renge of wallpapers, Maximum pasting speed is 30 m/min. With paste sensor, possible to joint with another convenient equipments. Makes the pasting work much accurate,efficient and easy than to do it by hand work. Folding floorstand is convenient for handling of a car, and has locking casters. The digital LED shows clear views of wall coverings length and count the number.

Technical specifications
Products code : 81-1133
Dimention : W 1500 x D 722 x H 876 mm
Net weight : 37 kgs (Without cutting device)
Power supply : Single phase AC220V
Pasting speed : 30m/min
Working width : 1100 mm

Manual pasting machine for less than 72cm-width wallpaper. Light weight and Small sized machine! Power supply-free type. Does not need a large place. You can paste it by turning a steering wheel, or pull the wallpaper. Adjust adhesive amount onto wallpaper by the setting of slide-levers. You can paste adhesive accurately by pulling wallpaper. "Even it's possible by steering wheel." The length of the wall paper which you pasted is displayed by the counter.

Technical specifications
Products code : 81-1440
Dimention : W 840 x D 280 x H 246 mm
Net weight : 14 kgs
Working width : 728 mm
Paste tank : 4.4 Liter

Manual wallpaper pasting machine for less than 110cm-width wallpaper. After having set wall coverings and put paste adhesive, past is applied if you turn a operating handle. Anyone can paste the adhesive on the back of wallcovering uniformly and easily. With a measuring counter, lightweight 25 kgs and reasonable price. Innovative uses of stainless steel, aluminum steel, and other corrosion resistant material allow years of continuous use.

Technical specifications
Products code : 81-1430
Dimention : W 1280 x D 280 x H 1000 mm
Net weight : 25 kgs
Working width : 1100 mm

Manual pasting machine for less than 140cm (55 inches) width wallpaper. Power supply-free type. A measuring counter accurately measures in inches. You can apply wallpaper adhesive accurately by this machine. By the adjusting-levers, adjustable the amount of adhesive with uniform quality.

Technical specifications
PProducts code : 16-1400
Dimention : W 1500 x D 800 x H 908 mm
Net weight : 40 kgs
Working width : 1400 mm [55 inches]
Paste tank : 8.4 Liter

The adhesives both powdered and glue are stirred with water as to get suitable viscosity for the use of interior finish work.By changing the switch lever motor turns reverse and the hose changes from delivering to suction hose. The adhesives in the adhesive pan of a pasting machine can be sucked out in cleaning.There is no worry to stir too much as the timer attached works within 30 minutes.

Technical specifications
Products code : 11-6323
Dimention : W 500 x D 500 x H 750 mm
Net weight : 16.5 kgs
Power supply : Single phase AC100V, 300W
Tank capacity : 36 Liter
Mixing time : 10 minutes
Supply capacity(60Hz) : about 20 Liter/min
Supply capacity(50Hz) : about 17 Liter / min

Electric powered pump for wallpaper paste adhesive. This pump supplies paste adhesive from bucket to other position (for example pasting machine tank) with only the push of a button. A reduction in labor is realized. more additions, suction function, lingtweight, and a grip.

Technical specifications
Products code : 11-6321
Dimention : W 190 x D 280 x H 190 mm
Net weight : 7.8 kgs
Power supply : Single phase AC100V, 300W
Supply capacity : about 4.5 Liter/min
Suction capacity : about 4.5 Liter / min
Hose diameter :φ19 mm x 1.5 m (Supply side)
Hose diameter :φ19 mm x 1.5 m (Suction side)

Putting powdered putty and water you can get smooth putty in a short time. Prevent mingling of the air into putty, smooth and uniform putty is gained. And is easy to extend and easy to cut.Prevent mingling of the air into putty, smooth and uniform putty is gained. And is easy to extend and easy to cut.There is no worry to knead too much as the timer attached decides the time to work.

Technical specifications
Products code : 11-3211
Dimention : W 420 x D 280 x H 425 mm
Net weight : 10.8 kgs
Power supply : Single phase AC100V, 90W
Tank capacity : 40 Liter
Kneeding time : about 10 minutes
Rotation speed : 65 rpm(60Hz) 54rpm(50Hz)

PATELARK FLEX is usable for pasting putty on the wall-board. Put moderate putty into PATELARK FLEX, hold to a wall-board, and take the grips. Moderate putty are released on wall-board according to regulate-structure uniformity. Pasted putty width is uniformity with special spatula. PATELARK FLEX is suitable at the work of v-joints and slant wall-board.

Technical specifications
Products code : 11-3125
Dimention : W 310 x D 169 x H 151 mm
Net weight : 1.9 kgs
Spatura width : 200 mm
Working width : 100 mm - 170 mm
Putty capacity : about 1.2 kgs